6706 Injector Rail Assembly Remover EN-49248 for Cadillac, Saturn, Pontiac,Chevy

Description

【Application】 For 2007-2014 General Motors Direct Injection Engines, compatible with Pontiac, Saturn, Cadillac and Chevrolet vehicles.
【Fitment 】Work on 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4. Note: If you are working on a 5.3L or 6.2L you will need a quantity of 2 sets.
【Function 】Used for removal of the direct injection fuel rail without damage. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly.
【Material】Made of high hardened impact grade steel, which is high strength, no-deformation, rust-resistance and durable to life-long seevice to use.
【Satisfaction Guarantee】 If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.
6706 Injector Rail Assembly Remover For 2007-2014 General Motors Direct Injection Engines
Replace OTC 6706, EN-49248
Compatible with Buick, Pontiac, Saturn, Cadillac and Chevrolet vehicles.
Work on 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.
Note: If you are working on a 5.3L or 6.2L you will need a quantity of 2 sets.
Application Chart
Why you need this tool?
The fuel rail and injector assembly used on the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.
Once the engine has been run, injector and rail removal is very difficult, what's more, you need to remove the assembly to prevent damaging an injector bore in the cylinder head or the mount assembly
Because each mount assembly contains an isolator, so you cannot have any force applied to the mount for removal.
So you need the special tool to help you remove the fuel rail and injector assembly.
The rail assembly must be removed as straight as possible without any damages.
This tool set installs in place of the mounting bolts, and reaches under the injector rail near each mount location.
The hand wheels on this tool at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head, and rail mount assemblies.
Easy to work, and save your time.
Using Instruction
Step1
Remove the fuel injection fuel rail noiseshield-(1).
Disconnect the electrical harness from the fuel rail harnessconnection.Disconnect all 4-fuel injector electricalconnections.Remove the fuel rail assembly retaining bolts.
Note: Use care to avoid contact with the fuel rail harness duringspecial tool installation and fuel rail removal.
Step2
Install EN-49248 studs-(1) into the 2 center fuel rail assemblyretaining bolt locations.
Tighten the studs to22-Y(16-lb-ft).
Install EN-49248 remover-(2) onto each stud, and engage the hooks tothe fuel rail.
Install the nuts-(3) retaining theremover onto the studs and tighten until snug.
Note: EN-49248 will assist in the proper removal of the fuel railassembly. Ensure that the following conditions are met:
Step3
Turn the handles simultaneously in order to pull the fuelrail straight out along the fuel injector axis.
DO NOT twist when pulling out on the fuel rail and injectorassembly.
Using EN-49248 remover, remove the fuel rail assembly-(1).
Payment method:
We accept PayPal payment only.
Contact us:
If you meet any problem after receiving our product, please feel free to contact us. We will try our best to solve your problem.
Shipping policy:
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Return & Warranty:
1.We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund.
2.Leave a message note in returned box quoting your item(s) ID and buyer ID.
3.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
4.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
5.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return
About reply:
If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
About Feedback:
Please contact us before leaving Netural or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
If you are satisfied with our service, please leave FOUR 5-Detailed Selling Rating (DSR). Thanks!